|
|
 |
In addition to the billet sawing machines and tube layer sawing machines we also manufacture rail sawing and drilling machines, KKS-S or KKS-SB for cutting and cutting into lengths of different rail
types. |
| This saw type performs the separation if the following prerequisites have been
met: |
| work-pieces |
rail profiles like UIC54, UIC60, S49, R65 |
| dimension of the work-piece |
top height up to 180 mm, foot width up to 200
mm |
| material strength |
up to 1400 N/mm2 |
| diameter of saw-blades |
630 to 1000 mm |
| diameter of holes |
up to 35 mm |
| type of saw-blade |
HM |
| feed per tooth |
0,07 - 0,15 mm/tooth |
| clamping of work-piece |
horizontal direction: hydraulically with clamp
on foot
vertical direction: hydraulically with 4 cylinders on railhead |
| feed direction of the saw |
below 15° diagonal down |
|
